为了弥补距离矢量路由协议的不足,IEFI组织开发了一种基于链路状态的内部网关协议OSPF |
实验环境:红,绿,蓝三个颜色区域代表三个不同网络的办公场所,要求使用OSPF协议实现网络互通。
10年积累的网站建设、成都网站建设经验,可以快速应对客户对网站的新想法和需求。提供各种问题对应的解决方案。让选择我们的客户得到更好、更有力的网络服务。我虽然不认识你,你也不认识我。但先网站策划后付款的网站建设流程,更有延寿免费网站建设让你可以放心的选择与我们合作。
pc1:172.16.1.1
pc2:172.16.2.1
pc3:172.16.3.1
R1:GE0/0/0 172.16.1.254 GE2/0/0 192.168.2.1 GE0/0/1 192.168.1.1
R2:GE0/0/0 172.16.2.254 GE0/0/1 192.168.2.3 GE2/0/0 192.168.2.3
R3:GE0/0/0 172.16.3.254 GE0/0/1 192.168.1.3 GE2/0/0 192.168.3.3
R1:
[R1]INT GigabitEthernet 0/0/0 [R1-GigabitEthernet0/0/0]IP ADD 172.16.1.254 24 May 21 2020 10:38:30-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [R1-GigabitEthernet0/0/0]INT G2/0/0 [R1-GigabitEthernet2/0/0]IP ADD 192.168.2.1 24 May 21 2020 10:38:48-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet2/0/0 has entered the UP state. [R1-GigabitEthernet2/0/0]INT G0/0/1 [R1-GigabitEthernet0/0/1]IP ADD 192.168.1.1 24 [R1-GigabitEthernet0/0/1] May 21 2020 10:39:03-08:00 R1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state.
R2:
[R2]int g0/0/1 [R2-GigabitEthernet0/0/1]ip add 192.168.2.2 24 May 21 2020 10:40:28-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [R2-GigabitEthernet0/0/1]int g2/0/0 [R2-GigabitEthernet2/0/0]ip add 192.168.3.2 24 May 21 2020 10:40:39-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet2/0/0 has entered the UP state. [R2-GigabitEthernet2/0/0]int g0/0/0 [R2-GigabitEthernet0/0/0]ip add 172.16.2.254 24 May 21 2020 10:40:57-08:00 R2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state.
R3:
[R3]int GigabitEthernet 0/0/0 [R3-GigabitEthernet0/0/0]ip add 172.16.3.254 24 May 21 2020 10:42:11-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [R3-GigabitEthernet0/0/0]int g0/0/1 [R3-GigabitEthernet0/0/1]ip add 192.168.1.3 24 May 21 2020 10:42:21-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [R3-GigabitEthernet0/0/1]int g2/0/0 [R3-GigabitEthernet2/0/0]ip add 192.168.3.3 24 May 21 2020 10:42:51-08:00 R3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP on the interface GigabitEthernet2/0/0 has entered the UP state. [R3-GigabitEthernet2/0/0]
R1:
[R1]OSPF 1 [R1-ospf-1]AREA 0 [R1-ospf-1-area-0.0.0.0]NETWORK 172.16.1.0 0.0.0.255 [R1-ospf-1-area-0.0.0.0]NETWORK 192.168.2.0 0.0.0.255 [R1-ospf-1-area-0.0.0.0]NETWORK 192.168.1.0 0.0.0.255
R2:
[R2]OSPF 1 [R2-ospf-1]AREA 0 [R2-ospf-1-area-0.0.0.0]NETWO [R2-ospf-1-area-0.0.0.0]network 172.16.2.0 0.0.0.255 [R2-ospf-1-area-0.0.0.0]NETWORK 192.168.2.0 0.0.0.255 [R2-ospf-1-area-0.0.0.0]NETWORK 192.168.3.0 0.0.0.255
R3:
[R3]OSPF 1 [R3-ospf-1]AREA 0 [R3-ospf-1-area-0.0.0.0]NETWORK 172.16.3.0 0.0.0.255 [R3-ospf-1-area-0.0.0.0]NETWORK 192.168.1.0 0.0.0.255 [R3-ospf-1-area-0.0.0.0]NETWORK 192.168.3.0 0.0.0.255
如此,OSPF配置完毕!
原文地址: https://www.linuxprobe.com/ospf-ensp.html