文章 from oracle 官网
渌口网站制作公司哪家好，找成都创新互联公司！从网页设计、网站建设、微信开发、APP开发、响应式网站设计等网站项目制作，到程序开发，运营维护。成都创新互联公司从2013年成立到现在10年的时间，我们拥有了丰富的建站经验和运维经验，来保证我们的工作的顺利进行。专注于网站建设就选成都创新互联公司。
You can control when and how often a job repeats.
About Setting the Repeat Interval
You control when and how often a job repeats by setting the repeat_interval attribute of the job itself or the named schedule that the job references. You can set repeat_interval with DBMS_SCHEDULER package procedures or with Cloud Control.
Using the Scheduler Calendaring Syntax
The main way to set how often a job repeats is to set the repeat_interval attribute with a Scheduler calendaring expression.
Using a PL/SQL Expression
When you need more complicated capabilities than the calendaring syntax provides, you can use PL/SQL expressions. You cannot, however, use PL/SQL expressions for windows or in named schedules. The PL/SQL expression must evaluate to a date or a timestamp.
Differences Between PL/SQL Expression and Calendaring Syntax Behavior
There are important differences in behavior between a calendaring expression and PL/SQL repeat interval.
Repeat Intervals and Daylight Savings
For repeating jobs, the next time a job is scheduled to run is stored in a timestamp with time zone column.
You control when and how often a job repeats by setting the repeat_interval attribute of the job itself or the named schedule that the job references. You can set repeat_interval with DBMS_SCHEDULER package procedures or with Cloud Control.
Evaluating the repeat_interval results in a set of timestamps. The Scheduler runs the job at each timestamp. Note that the start date from the job or schedule also helps determine the resulting set of timestamps. If no value for repeat_interval is specified, the job runs only once at the specified start date.
Immediately after a job starts, the repeat_interval is evaluated to determine the next scheduled execution time of the job. While this might arrive while the job is still running, a new instance of the job does not start until the current one completes.
See Also:
Oracle Database PL/SQL Packages and Types Reference for more information about repeat_interval evaluation
The main way to set how often a job repeats is to set the repeat_interval attribute with a Scheduler calendaring expression.
See Also:
Oracle Database PL/SQL Packages and Types Reference for a detailed description of the calendaring syntax for repeat_interval as well as the CREATE_SCHEDULE procedure
Examples of Calendaring Expressions
The following examples illustrate simple repeat intervals. For simplicity, it is assumed that there is no contribution to the evaluation results by the start date.
Run every Friday. (All three examples are equivalent.)
FREQ=DAILY; BYDAY=FRI; FREQ=WEEKLY; BYDAY=FRI; FREQ=YEARLY; BYDAY=FRI;
Run every other Friday.
FREQ=WEEKLY; INTERVAL=2; BYDAY=FRI;
Run on the last day of every month.
FREQ=MONTHLY; BYMONTHDAY=-1;
Run on the next to last day of every month.
FREQ=MONTHLY; BYMONTHDAY=-2;
Run on March 10th. (Both examples are equivalent)
FREQ=YEARLY; BYMONTH=MAR; BYMONTHDAY=10; FREQ=YEARLY; BYDATE=0310;
Run every 10 days.
FREQ=DAILY; INTERVAL=10;
Run daily at 4, 5, and 6PM.
FREQ=DAILY; BYHOUR=16,17,18;
Run on the 15th day of every other month.
FREQ=MONTHLY; INTERVAL=2; BYMONTHDAY=15;
Run on the 29th day of every month.
FREQ=MONTHLY; BYMONTHDAY=29;
Run on the second Wednesday of each month.
FREQ=MONTHLY; BYDAY=2WED;
Run on the last Friday of the year.
FREQ=YEARLY; BYDAY=-1FRI;
Run every 50 hours.
FREQ=HOURLY; INTERVAL=50;
Run on the last day of every other month.
FREQ=MONTHLY; INTERVAL=2; BYMONTHDAY=-1;
Run hourly for the first three days of every month.
FREQ=HOURLY; BYMONTHDAY=1,2,3;
Here are some more complex repeat intervals:
Run on the last workday of every month (assuming that workdays are Monday through Friday).
FREQ=MONTHLY; BYDAY=MON,TUE,WED,THU,FRI; BYSETPOS=-1
Run on the last workday of every month, excluding company holidays. (This example references an existing named schedule called Company_Holidays.)
FREQ=MONTHLY; BYDAY=MON,TUE,WED,THU,FRI; EXCLUDE=Company_Holidays; BYSETPOS=-1
Run at noon every Friday and on company holidays.
FREQ=YEARLY;BYDAY=FRI;BYHOUR=12;INCLUDE=Company_Holidays
Run on these three holidays: July 4th, Memorial Day, and Labor Day. (This example references three existing named schedules, JUL4, MEM, and LAB, where each defines a single date corresponding to a holiday.)
JUL4,MEM,LAB
Examples of Calendaring Expression Evaluation
A repeat interval of "FREQ=MINUTELY;INTERVAL=2;BYHOUR=17; BYMINUTE=2,4,5,50,51,7;" with a start date of 28-FEB-2004 23:00:00 will generate the following schedule:
SUN 29-FEB-2004 17:02:00 SUN 29-FEB-2004 17:04:00 SUN 29-FEB-2004 17:50:00 MON 01-MAR-2004 17:02:00 MON 01-MAR-2004 17:04:00 MON 01-MAR-2004 17:50:00 ...
A repeat interval of "FREQ=MONTHLY;BYMONTHDAY=15,-1" with a start date of 29-DEC-2003 9:00:00 will generate the following schedule:
WED 31-DEC-2003 09:00:00 THU 15-JAN-2004 09:00:00 SAT 31-JAN-2004 09:00:00 SUN 15-FEB-2004 09:00:00 SUN 29-FEB-2004 09:00:00 MON 15-MAR-2004 09:00:00 WED 31-MAR-2004 09:00:00 ...
A repeat interval of "FREQ=MONTHLY;" with a start date of 29-DEC-2003 9:00:00 will generate the following schedule. (Note that because there is no BYMONTHDAY clause, the day of month is retrieved from the start date.)
MON 29-DEC-2003 09:00:00 THU 29-JAN-2004 09:00:00 SUN 29-FEB-2004 09:00:00 MON 29-MAR-2004 09:00:00 ...
Example of Using a Calendaring Expression
As an example of using the calendaring syntax, consider the following statement:
BEGIN DBMS_SCHEDULER.CREATE_JOB ( job_name => 'scott.my_job1', start_date => '15-JUL-04 01.00.00 AM Europe/Warsaw', repeat_interval => 'FREQ=MINUTELY; INTERVAL=30;', end_date => '15-SEP-04 01.00.00 AM Europe/Warsaw', comments => 'My comments here'); END; /
This creates my_job1 in scott. It will run for the first time on July 15th and then run until September 15. The job is run every 30 minutes.
When you need more complicated capabilities than the calendaring syntax provides, you can use PL/SQL expressions. You cannot, however, use PL/SQL expressions for windows or in named schedules. The PL/SQL expression must evaluate to a date or a timestamp.
Other than this restriction, there are no limitations, so with sufficient programming, you can create every possible repeat interval. As an example, consider the following statement:
BEGIN DBMS_SCHEDULER.CREATE_JOB ( job_name => 'scott.my_job2', start_date => '15-JUL-04 01.00.00 AM Europe/Warsaw', repeat_interval => 'SYSTIMESTAMP + INTERVAL '30' MINUTE', end_date => '15-SEP-04 01.00.00 AM Europe/Warsaw', comments => 'My comments here'); END; /
This creates my_job1 in scott. It will run for the first time on July 15th and then every 30 minutes until September 15. The job is run every 30 minutes because repeat_interval is set to SYSTIMESTAMP + INTERVAL '30' MINUTE, which returns a date 30 minutes into the future.
There are important differences in behavior between a calendaring expression and PL/SQL repeat interval.
These differences include the following:
Start date
Using the calendaring syntax, the start date is a reference date only. Therefore, the schedule is valid as of this date. It does not mean that the job will start on the start date.
Using a PL/SQL expression, the start date represents the actual time that the job will start executing for the first time.
Next run time
As an example of the difference, for a job that is scheduled to start at 2:00 PM and repeat every 2 hours, but actually starts at 2:10:
If calendaring syntax specified the repeat interval, then it would repeat at 4, 6 and so on.
If a PL/SQL expression is used, then the job would repeat at 4:10, and if the next job actually started at 4:11, then the subsequent run would be at 6:11.
Using the calendaring syntax, the next time the job runs is fixed.
Using the PL/SQL expression, the next time the job runs depends on the actual start time of the current job run.
To illustrate these two points, consider a situation where you have a start date of 15-July-2003 1:45:00 and you want it to repeat every two hours. A calendar expression of "FREQ=HOURLY; INTERVAL=2; BYMINUTE=0;" will generate the following schedule:
TUE 15-JUL-2003 03:00:00 TUE 15-JUL-2003 05:00:00 TUE 15-JUL-2003 07:00:00 TUE 15-JUL-2003 09:00:00 TUE 15-JUL-2003 11:00:00 ...
Note that the calendar expression repeats every two hours on the hour.
A PL/SQL expression of "SYSTIMESTAMP + interval '2' hour", however, might have a run time of the following:
TUE 15-JUL-2003 01:45:00 TUE 15-JUL-2003 03:45:05 TUE 15-JUL-2003 05:45:09 TUE 15-JUL-2003 07:45:14 TUE 15-JUL-2003 09:45:20 ...