SQL Server中怎么实现约束增强，相信很多没有经验的人对此束手无策，为此本文总结了问题出现的原因和解决方法，通过这篇文章希望你能解决这个问题。
创新互联从2013年创立，先为宁洱等服务建站，宁洱等地企业，进行企业商务咨询服务。为宁洱企业网站制作PC+手机+微官网三网同步一站式服务解决您的所有建站问题。
在许多情况下，对外键使用更复杂的逻辑表达式是非常有用的。 此外，在某些情况下能够在索引视图创建约束也将非常实用。 我将举例说明，同时我希望针对此文的投票链接会尽快加上。当外键中需要更为复杂的逻辑表达式时 考虑下面的简单常识： 您的设备的最大电流不能超过您插入到它的电路的最大电流。 假设下面的表存储电路和设备数据：复制代码 代码如下: CREATE TABLE Data.Curcuits(CurcuitID INT NOT NULL CONSTRAINT PK_Curcuits PRIMARY KEY, MaximumCurrent INT NOT NULL, Description VARCHAR(100) NOT NULL); GO INSERT INTO Data.Curcuits(CurcuitID, MaximumCurrent, Description) SELECT 1, 25, 'Deck and Garage'; GO CREATE TABLE Data.Devices(DeviceID INT NOT NULL CONSTRAINT PK_Devices PRIMARY KEY, CurcuitID INT NULL, MaximumCurrent INT NOT NULL, Description VARCHAR(100) NOT NULL, CONSTRAINT FK_Devices_Curcuits FOREIGN KEY(CurcuitID) REFERENCES Data.Curcuits(CurcuitID) ); GO
It would be very convenient to issue a simple command and implement this business rule: 一个非常简便的命令就可能实现这个业务规则： ALTER TABLE Data.Devices ADD CONSTRAINT FK_Devices_Curcuits FOREIGN KEY(CurcuitID, MaximumCurrent) REFERENCES Data.Curcuits(CurcuitID, MaximumCurrent) MATCH ON((Data.Devices.CurcuitID = Data.Curcuits.CurcuitID) AND (Data.Devices.MaximumCurrent <= Data.Curcuits.MaximumCurrent)); However, it is not supported, so I need to use a workaround, one more column and three constraints instead of one, as follows: 然而，该语句并不被支持，所以必须采用其他办法——多增加一列约束，使用3个而不是1个约束，如下所示： ALTER TABLE Data.Curcuits ADD CONSTRAINT UNQ_Curcuits UNIQUE(CurcuitID, MaximumCurrent); GO ALTER TABLE Data.Devices ADD CurcuitMaximumCurrent INT NULL; GO ALTER TABLE Data.Devices DROP CONSTRAINT FK_Devices_Curcuits; GO ALTER TABLE Data.Devices ADD CONSTRAINT FK_Devices_Curcuits FOREIGN KEY(CurcuitID, CurcuitMaximumCurrent) REFERENCES Data.Curcuits(CurcuitID, MaximumCurrent) ON UPDATE CASCADE; GO ALTER TABLE Data.Devices ADD CONSTRAINT CHK_Devices_SufficientCurcuitMaximumCurrent CHECK(CurcuitMaximumCurrent >= MaximumCurrent); GO You can verify that the constraints work: 你可以验证该约束有效： INSERT INTO Data.Devices(DeviceID, CurcuitID, MaximumCurrent, CurcuitMaximumCurrent, Description) SELECT 1, 1, 50, 25, 'Electric car charger' Msg 547, Level 16, State 0, Line 1 The INSERT statement conflicted with the CHECK constraint "CHK_Devices_SufficientCurcuitMaximumCurrent". The conflict occurred in database "Test", table "data.Devices". The statement has been terminated. INSERT 语句和CHECK约束"CHK_Devices_SufficientCurcuitMaximumCurrent"发生冲突。 该冲突发生在数据库"Test"的"data.Devices"表。 该语句被终止执行。 As you have seen, the implementation of a very simple and very common business rule is quite involved, because such business rules are not directly supported by the database engine. 可以看出，一个非常简单而普通的业务规则实现起来也相当繁杂，因为数据库引擎并不直接支持这种业务规则。 When you want to create constraints on indexed views 在索引视图上创建约束 Even when your database guarantees that “the maximum current of your device cannot exceed the maximum current of the circuit you plug it into”, it is not good enough. Consider the following sample data: 尽管数据库保证“您的设备的最大电流不能超过您插入到它的电路的最大电流”，但这还不够。请看下列示例数据： INSERT INTO Data.Devices(DeviceID, CurcuitID, MaximumCurrent, CurcuitMaximumCurrent, Description) SELECT 2, 1, 15, 25, 'ShopVac'; INSERT INTO Data.Devices(DeviceID, CurcuitID, MaximumCurrent, CurcuitMaximumCurrent, Description) SELECT 3, 1, 15, 25, 'Miter Saw'; The database structure allows to plug more than one device into a circuit, which is correct, but if you turn both devices on, their combined maximum current exceeds the circuit's maximum current. To enforce this business rule, it would be natural to create an indexed view, so that the database guarantees that the totals are always correct: 数据库中的数据表明可以插入一个以上的设备到电路，这没有错，可是当所有的设备都打开时，它们的最大电流之和会超过电路最大电流。为了加强这个业务规则，很自然的会创建一个索引视图以使数据库保证电流之和总是正确的。 CREATE VIEW Data.TotalMaximumCurrentPerCircuit WITH SCHEMABINDING AS SELECT d.CurcuitID, c.MaximumCurrent AS CircuitMaximumCurrent, SUM(d.MaximumCurrent) AS TotalMaximumCurrent, COUNT_BIG(*) AS NumDevices FROM Data.Devices d JOIN Data.Curcuits c ON d.CurcuitID = c.CurcuitID GROUP BY d.CurcuitID, c.MaximumCurrent; GO CREATE UNIQUE CLUSTERED INDEX Data_TotalMaximumCurrentPerCircuit ON Data.TotalMaximumCurrentPerCircuit(CurcuitID); GO If I could create a check constraint on that indexed view, I would be all set: 如果能在该索引视图上创建一个约束，我将进行这样的设置： ALTER VIEW Data.TotalMaximumCurrentPerCircuit ADD CONSTRAINT CHK_TotalMaximumCurrentPerCircuit_ValidCurcuit CHECK(TotalMaximumCurrent <= CircuitMaximumCurrent) Instead, I need to use triggers or rather contrived kludges. A built in native support for such quite common business rules would increase the usefulness of SQL Server. 实际上，我必须使用触发器或者精心拼凑Check约束来实现。如果数据库内置支持这种相当普遍的业务规则，那将会增加SQL Server的实用性 。
看完上述内容，你们掌握SQL Server中怎么实现约束增强的方法了吗？如果还想学到更多技能或想了解更多相关内容，欢迎关注创新互联行业资讯频道，感谢各位的阅读！