hotspot 虚拟机（咱们平时开发用的sun公司的虚拟机，其他两大商用虚拟机是BEA的JRockit和IBM的J9）里面两个字节来限制大小，所以最多65536行，超过javac会无法编译。而且一个Java方法不能超过64k。一般一个Java类不要有太多行数，如果一个Java代码超过几千甚至过万，个人觉得应该考虑一些代码优化方式，比如继承；或者重新构思这个类。代码行数太多可读性查，不利于维护。
成都创新互联公司专注于网站建设|网站维护|优化|托管以及网络推广，积累了大量的网站设计与制作经验，为许多企业提供了网站定制设计服务，案例作品覆盖凿毛机等行业。能根据企业所处的行业与销售的产品，结合品牌形象的塑造，量身建设品质网站。
看看下面的代码，新建类T，把代码拷进去便可运行。
有运行截图：
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
import java.awt.geom.*;
import java.io.*;
@SuppressWarnings({"serial","unused"})
class Point implements Serializable
{
int x,y;
Color col;
int tool;
int boarder;
Point(int x, int y, Color col, int tool, int boarder)
{
this.x = x;
this.y = y;
this.col = col;
this.tool = tool;
this.boarder = boarder;
}
}
@SuppressWarnings({"serial","unused"})
class paintboard extends Frame implements ActionListener,MouseMotionListener,MouseListener,ItemListener
{
int x = -1, y = -1;
int con = 1;//画笔大小
int Econ = 5;//橡皮大小
int toolFlag = 0;//toolFlag:工具标记
//toolFlag工具对应表：
//（0--画笔）；（1--橡皮）；（2--清除）；
//（3--直线）；（4--圆）；（5--矩形）；
Color c = new Color(0,0,0); //画笔颜色
BasicStroke size = new BasicStroke(con,BasicStroke.CAP_BUTT,BasicStroke.JOIN_BEVEL);//画笔粗细
Point cutflag = new Point(-1, -1, c, 6, con);//截断标志
@SuppressWarnings("unchecked")
Vector paintInfo = null;//点信息向量组
int n = 1;
FileInputStream picIn = null;
FileOutputStream picOut = null;
ObjectInputStream VIn = null;
ObjectOutputStream VOut = null;
// *工具面板--画笔，直线，圆，矩形，多边形,橡皮，清除*/
Panel toolPanel;
Button eraser, drLine,drCircle,drRect;
Button clear ,pen;
Choice ColChoice,SizeChoice,EraserChoice;
Button colchooser;
Label 颜色,大小B,大小E;
//保存功能
//Button openPic,savePic;
FileDialog openPicture,savePicture;
@SuppressWarnings("unchecked")
paintboard(String s)
{
super(s);
addMouseMotionListener(this);
addMouseListener(this);
paintInfo = new Vector();
/*各工具按钮及选择项*/
//颜色选择
ColChoice = new Choice();
ColChoice.add("black");
ColChoice.add("red");
ColChoice.add("blue");
ColChoice.add("green");
ColChoice.addItemListener(this);
//画笔大小选择
SizeChoice = new Choice();
SizeChoice.add("1");
SizeChoice.add("3");
SizeChoice.add("5");
SizeChoice.add("7");
SizeChoice.add("9");
SizeChoice.addItemListener(this);
//橡皮大小选择
EraserChoice = new Choice();
EraserChoice.add("5");
EraserChoice.add("9");
EraserChoice.add("13");
EraserChoice.add("17");
EraserChoice.addItemListener(this);
////////////////////////////////////////////////////
toolPanel = new Panel();
clear = new Button("清除");
eraser = new Button("橡皮");
pen = new Button("画笔");
drLine = new Button("画直线");
drCircle = new Button("画圆形");
drRect = new Button("画矩形");
colchooser = new Button("显示调色板");
clear.setBackground(Color.GREEN);
drRect.setBackground(Color.GREEN);
pen.setBackground(Color.GREEN);
eraser.setBackground(Color.GREEN);
drLine.setBackground(Color.GREEN);
drCircle.setBackground(Color.GREEN);
colchooser.setBackground(Color.GREEN);
//各组件事件监听
clear.addActionListener(this);
eraser.addActionListener(this);
pen.addActionListener(this);
drLine.addActionListener(this);
drCircle.addActionListener(this);
drRect.addActionListener(this);
colchooser.addActionListener(this);
颜色 = new Label("画笔颜色",Label.CENTER);
大小B = new Label("画笔大小",Label.CENTER);
大小E = new Label("橡皮大小",Label.CENTER);
颜色.setBackground(Color.gray);
大小B.setBackground(Color.gray);
大小E.setBackground(Color.gray);
//面板添加组件
toolPanel.add(pen);
toolPanel.add(drLine);
toolPanel.add(drCircle);
toolPanel.add(drRect);
toolPanel.add(颜色); toolPanel.add(ColChoice);
toolPanel.add(大小B); toolPanel.add(SizeChoice);
toolPanel.add(colchooser);
toolPanel.add(eraser);
toolPanel.add(大小E); toolPanel.add(EraserChoice);
toolPanel.add(clear);
//工具面板到APPLET面板
add(toolPanel,BorderLayout.NORTH);
setBounds(60,60,900,600); setVisible(true);
validate();
//dialog for save and load
openPicture = new FileDialog(this,"打开图画",FileDialog.LOAD);
openPicture.setVisible(false);
savePicture = new FileDialog(this,"保存图画",FileDialog.SAVE);
savePicture.setVisible(false);
openPicture.addWindowListener(new WindowAdapter()
{
public void windowClosing(WindowEvent e)
{ openPicture.setVisible(false); }
});
savePicture.addWindowListener(new WindowAdapter()
{
public void windowClosing(WindowEvent e)
{ savePicture.setVisible(false); }
});
addWindowListener(new WindowAdapter()
{
public void windowClosing(WindowEvent e)
{ System.exit(0);}
});
}
public void paint(Graphics g)
{
Graphics2D g2d = (Graphics2D)g;
Point p1,p2;
n = paintInfo.size();
if(toolFlag==2)
g.clearRect(0,0,getSize().width,getSize().height);//清除
for(int i=1; in ;i++){
p1 = (Point)paintInfo.elementAt(i-1);
p2 = (Point)paintInfo.elementAt(i);
size = new BasicStroke(p1.boarder,BasicStroke.CAP_BUTT,BasicStroke.JOIN_BEVEL);
g2d.setColor(p1.col);
g2d.setStroke(size);
if(p1.tool==p2.tool)
{
switch(p1.tool)
{
case 0://画笔
Line2D line1 = new Line2D.Double(p1.x, p1.y, p2.x, p2.y);
g2d.draw(line1);
break;
case 1://橡皮
g.clearRect(p1.x, p1.y, p1.boarder, p1.boarder);
break;
case 3://画直线
Line2D line2 = new Line2D.Double(p1.x, p1.y, p2.x, p2.y);
g2d.draw(line2);
break;
case 4://画圆
Ellipse2D ellipse = new Ellipse2D.Double(p1.x, p1.y, Math.abs(p2.x-p1.x) , Math.abs(p2.y-p1.y));
g2d.draw(ellipse);
break;
case 5://画矩形
Rectangle2D rect = new Rectangle2D.Double(p1.x, p1.y, Math.abs(p2.x-p1.x) , Math.abs(p2.y-p1.y));
g2d.draw(rect);
break;
case 6://截断，跳过
i=i+1;
break;
default :
}//end switch
}//end if
}//end for
}
public void itemStateChanged(ItemEvent e)
{
if(e.getSource()==ColChoice)//预选颜色
{
String name = ColChoice.getSelectedItem();
if(name=="black")
{c = new Color(0,0,0); }
else if(name=="red")
{c = new Color(255,0,0);}
else if(name=="green")
{c = new Color(0,255,0);}
else if(name=="blue")
{c = new Color(0,0,255);}
}
else if(e.getSource()==SizeChoice)//画笔大小
{
String selected = SizeChoice.getSelectedItem();
if(selected=="1")
{
con = 1;
size = new BasicStroke(con,BasicStroke.CAP_BUTT,BasicStroke.JOIN_BEVEL);
}
else if(selected=="3")
{
con = 3;
size = new BasicStroke(con,BasicStroke.CAP_BUTT,BasicStroke.JOIN_BEVEL);
}
else if(selected=="5")
{con = 5;
size = new BasicStroke(con,BasicStroke.CAP_BUTT,BasicStroke.JOIN_BEVEL);
}
else if(selected=="7")
{con = 7;
size = new BasicStroke(con,BasicStroke.CAP_BUTT,BasicStroke.JOIN_BEVEL);
}
else if(selected=="9")
{con = 9;
size = new BasicStroke(con,BasicStroke.CAP_BUTT,BasicStroke.JOIN_BEVEL);
}
}
else if(e.getSource()==EraserChoice)//橡皮大小
{
String Esize = EraserChoice.getSelectedItem();
if(Esize=="5")
{ Econ = 5*2; }
else if(Esize=="9")
{ Econ = 9*2; }
else if(Esize=="13")
{ Econ = 13*2; }
else if(Esize=="17")
{ Econ = 17*3; }
}
}
@SuppressWarnings({"serial","unused", "unchecked"})
public void mouseDragged(MouseEvent e)
{
Point p1 ;
switch(toolFlag){
case 0://画笔
x = (int)e.getX();
y = (int)e.getY();
p1 = new Point(x, y, c, toolFlag, con);
paintInfo.addElement(p1);
repaint();
break;
case 1://橡皮
x = (int)e.getX();
y = (int)e.getY();
p1 = new Point(x, y, null, toolFlag, Econ);
paintInfo.addElement(p1);
repaint();
break;
default :
}
}
public void mouseMoved(MouseEvent e) {}
public void update(Graphics g)
{
paint(g);
}
@SuppressWarnings("unchecked")
public void mousePressed(MouseEvent e)
{
Point p2;
switch(toolFlag){
case 3://直线
x = (int)e.getX();
y = (int)e.getY();
p2 = new Point(x, y, c, toolFlag, con);
paintInfo.addElement(p2);
break;
case 4: //圆
x = (int)e.getX();
y = (int)e.getY();
p2 = new Point(x, y, c, toolFlag, con);
paintInfo.addElement(p2);
break;
case 5: //矩形
x = (int)e.getX();
y = (int)e.getY();
p2 = new Point(x, y, c, toolFlag, con);
paintInfo.addElement(p2);
break;
default :
}
}
@SuppressWarnings("unchecked")
public void mouseReleased(MouseEvent e)
{
Point p3;
switch(toolFlag){
case 0://画笔
paintInfo.addElement(cutflag);
break;
case 1: //eraser
paintInfo.addElement(cutflag);
break;
case 3://直线
x = (int)e.getX();
y = (int)e.getY();
p3 = new Point(x, y, c, toolFlag, con);
paintInfo.addElement(p3);
paintInfo.addElement(cutflag);
repaint();
break;
case 4: //圆
x = (int)e.getX();
y = (int)e.getY();
p3 = new Point(x, y, c, toolFlag, con);
paintInfo.addElement(p3);
paintInfo.addElement(cutflag);
repaint();
break;
case 5: //矩形
x = (int)e.getX();
y = (int)e.getY();
p3 = new Point(x, y, c, toolFlag, con);
paintInfo.addElement(p3);
paintInfo.addElement(cutflag);
repaint();
break;
default:
}
}
public void mouseEntered(MouseEvent e){}
public void mouseExited(MouseEvent e){}
public void mouseClicked(MouseEvent e){}
@SuppressWarnings("unchecked")
public void actionPerformed(ActionEvent e)
{
if(e.getSource()==pen)//画笔
{toolFlag = 0;}
if(e.getSource()==eraser)//橡皮
{toolFlag = 1;}
if(e.getSource()==clear)//清除
{
toolFlag = 2;
paintInfo.removeAllElements();
repaint();
}
if(e.getSource()==drLine)//画线
{toolFlag = 3;}
if(e.getSource()==drCircle)//画圆
{toolFlag = 4;}
if(e.getSource()==drRect)//画矩形
{toolFlag = 5;}
if(e.getSource()==colchooser)//调色板
{
Color newColor = JColorChooser.showDialog(this,"调色板",c);
c = newColor;
}
}
}
//end paintboard
public class T{
public static void main(String args[]){
new paintboard("画图程序"); }
}
一般来说，一个简单的管理系统，加上jsp的前端设计，能跑通的话得差不多四千行左右
不要被这个数量吓到，因为好多代码量比如构造函数 get set都是自动生成的
可以look at my name找一个项目例子去数一下