小编给大家分享一下在升级到kernel-3.17的centos-6.5上安装docker会遇到什么错误，相信大部分人都还不怎么了解，因此分享这篇文章给大家参考一下，希望大家阅读完这篇文章后大有收获，下面让我们一起去了解一下吧！
网站建设哪家好，找成都创新互联公司！专注于网页设计、网站建设、微信开发、微信平台小程序开发、集团企业网站建设等服务项目。为回馈新老客户创新互联还提供了忻城免费建站欢迎大家使用！
在升级到kernel-3.17的centos-6.5上安装docker，直接执行以下命令：
yum install golang
yum install docker-io
chkconfig add docker
service docker start
但出现了以下错误：
[root@osd2 ~]# service docker start
Starting cgconfig service: Error: cannot mount memory to /cgroup/memory: No such file or directory
/sbin/cgconfigparser; error loading /etc/cgconfig.conf: Cgroup mounting failed
Failed to parse /etc/cgconfig.conf [FAILED]
Starting docker: [ OK ]
[root@osd2 ~]# service docker start
[root@osd2 ~]# service docker status
docker dead but pid file exists
查了一下cgconfig：
[root@osd2 ~]# /etc/init.d/cgconfig status
Stopped
[root@osd2 ~]# /etc/init.d/cgconfig start
Starting cgconfig service: Error: cannot mount memory to /cgroup/memory: No such file or directory
/sbin/cgconfigparser; error loading /etc/cgconfig.conf: Cgroup mounting failed
Failed to parse /etc/cgconfig.conf [FAILED]
[root@osd2 ~]# ls /cgroup/
blkio devices freezer memory net_cls
memory是有的，但就是出错，需要修改：
[root@osd2 ~]# cat /etc/cgconfig.conf
#
# Copyright IBM Corporation. 2007
#
# Authors: Balbir Singh
# This program is free software; you can redistribute it and/or modify it
# under the terms of version 2.1 of the GNU Lesser General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it would be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#
# See man cgconfig.conf for further details.
#
# By default, mount all controllers to /cgroup/
mount {
cpuset = /cgroup/cpuset;
cpu = /cgroup/cpu;
cpuacct = /cgroup/cpuacct;
# memory = /cgroup/memory;
devices = /cgroup/devices;
freezer = /cgroup/freezer;
net_cls = /cgroup/net_cls;
blkio = /cgroup/blkio;
}
再次启动cgconfig，一切正常。但重启docker，依然报错：
[root@osd2 ~]# service docker status
docker dead but pid file exists
[root@osd2 ~]# tailf /var/log/docker
\nMon Jan 5 14:04:33 CST 2015\n
2015/01/05 14:04:33 docker daemon: 1.3.2 39fa2fa/1.3.2; execdriver: native; graphdriver:
[910cf963] +job serveapi(unix:///var/run/docker.sock)
[910cf963] +job init_networkdriver()
[info] Listening for HTTP on unix (/var/run/docker.sock)
Unable to enable network bridge NAT: iptables failed: iptables -I POSTROUTING -t nat -s 172.17.42.1/16 ! -o docker0 -j MASQUERADE: iptables v1.4.7: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
(exit status 3)
[910cf963] -job init_networkdriver() = ERR (1)
2015/01/05 14:04:33 (exit status 3)
日志显示无法创建nat网桥，看了一下正常的docker环境和modules：
[root@lm backup]# lsmod | grep nat
ebtable_nat 2009 0
ebtables 18135 1 ebtable_nat
iptable_nat 6051 1
nf_nat 23316 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 9506 4 iptable_nat,nf_nat
nf_conntrack 80390 6 xt_conntrack,xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
ip_tables 17831 3 iptable_nat,iptable_mangle,iptable_filter
[root@lm backup]# find /lib/modules/2.6.32-504.1.3.el6.x86_64/ -name "*nat*"
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_proto_dccp.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_proto_udplite.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_ftp.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_proto_sctp.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_sip.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_tftp.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_pptp.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/iptable_nat.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_snmp_basic.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_amanda.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_h423.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/ipv4/netfilter/nf_nat_irc.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/bridge/netfilter/ebt_snat.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/bridge/netfilter/ebt_dnat.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/bridge/netfilter/ebtable_nat.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/net/sched/act_nat.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/drivers/net/natsemi.ko
/lib/modules/2.6.32-504.1.3.el6.x86_64/kernel/drivers/net/phy/national.ko
编译过内核的环境：
[root@osd2 /]# lsmod | grep nat
ebtable_nat 2071 0
ebtables 26518 1 ebtable_nat
[root@osd2 modprobe.d]# find /lib/modules/3.17.4/ -name "*nat*"
/lib/modules/3.17.4/kernel/net/sched/act_nat.ko
/lib/modules/3.17.4/kernel/net/bridge/netfilter/ebt_snat.ko
/lib/modules/3.17.4/kernel/net/bridge/netfilter/ebt_dnat.ko
/lib/modules/3.17.4/kernel/net/bridge/netfilter/ebtable_nat.ko
/lib/modules/3.17.4/kernel/drivers/net/ethernet/natsemi
/lib/modules/3.17.4/kernel/drivers/net/ethernet/natsemi/natsemi.ko
/lib/modules/3.17.4/kernel/drivers/net/phy/national.ko
缺少了nat模块，才引起了上述错误，需要重新编译内核或使用旧内核。
以上是“在升级到kernel-3.17的centos-6.5上安装docker会遇到什么错误”这篇文章的所有内容，感谢各位的阅读！相信大家都有了一定的了解，希望分享的内容对大家有所帮助，如果还想学习更多知识，欢迎关注创新互联行业资讯频道！
网页标题：在升级到kernel-3.17的centos-6.5上安装docker会遇到什么错误
文章分享：
http://bzwzjz.com/article/gjipog.html
