k8s之滚动更新(RollingUpdate)与回滚

滚动更新

滚动更新是一次只更新一小部分副本，成功后，再更新更多的副本，最终完成所有副本的更新。滚动更新的最大的好处是零停机，整个更新过程始终有副本在运行，从而保证了业务的连续性。

创新互联公司专注于五通桥网站建设服务及定制，我们拥有丰富的企业做网站经验。热诚为您提供五通桥营销型网站建设，五通桥网站制作、五通桥网页设计、五通桥网站官网定制、微信小程序定制开发服务，打造五通桥网络公司原创品牌,更为您提供五通桥网站排名全网营销落地服务。

下面我们部署三副本应用，初始镜像为 httpd:2.2.31，然后将其更新到 httpd:2.2.32。

httpd:2.2.31 的配置文件如下：

apiVersion: apps/v1beta1
kind: Deployment
metadata:
  name: httpd
spec:
  replicas: 3
  template:
    metadata:
      labels:
        run: httpd
    spec:
      containers:
      - name: httpd
        image: httpd:2.2.31
        ports:
        - containerPort: 80

通过 kubectl apply 部署。

[root@k8s-master ~]# kubectl apply -f httpd.yml 
deployment.apps/httpd created
[root@k8s-master ~]# 
[root@k8s-master ~]# kubectl get deployments httpd -o wide
NAME    READY   UP-TO-DATE   AVAILABLE   AGE   CONTAINERS   IMAGES         SELECTOR
httpd   0/3     3            0           14s   httpd        httpd:2.2.31   run=httpd
[root@k8s-master ~]# kubectl get replicasets -o wide
NAME               DESIRED   CURRENT   READY   AGE   CONTAINERS   IMAGES         SELECTOR
httpd-56df754d56   3         3         3       37s   httpd        httpd:2.2.31   pod-template-hash=56df754d56,run=httpd
[root@k8s-master ~]# kubectl get pod
NAME                     READY   STATUS    RESTARTS   AGE
httpd-56df754d56-5hjt6   1/1     Running   0          52s
httpd-56df754d56-ngw9l   1/1     Running   0          52s
httpd-56df754d56-qtgbt   1/1     Running   0          52s

部署过程如下：

创建 Deployment httpd
创建 ReplicaSet httpd-551879778
创建三个 Pod
当前镜像为 httpd:2.2.31

将配置文件中 httpd:2.2.31 替换为 httpd:2.2.32，再次执行 kubectl apply。

apiVersion: apps/v1beta1
kind: Deployment
metadata:
  name: httpd
spec:
  replicas: 3
  template:
    metadata:
      labels:
        run: httpd
    spec:
      containers:
      - name: httpd
        image: httpd:2.2.32
        ports:
        - containerPort: 80

[root@k8s-master ~]# kubectl apply -f httpd.yml 
deployment.apps/httpd configured
[root@k8s-master ~]# 
[root@k8s-master ~]# kubectl get deployments httpd -o wide
NAME    READY   UP-TO-DATE   AVAILABLE   AGE     CONTAINERS   IMAGES         SELECTOR
httpd   3/3     1            3           3m54s   httpd        httpd:2.2.32   run=httpd
[root@k8s-master ~]# kubectl get replicasets -o wide
NAME               DESIRED   CURRENT   READY   AGE    CONTAINERS   IMAGES         SELECTOR
httpd-56df754d56   2         2         2       4m8s   httpd        httpd:2.2.31   pod-template-hash=56df754d56,run=httpd
httpd-77896d99b5   2         2         1       28s    httpd        httpd:2.2.32   pod-template-hash=77896d99b5,run=httpd
[root@k8s-master ~]# 
[root@k8s-master ~]# kubectl get pod
NAME                     READY   STATUS    RESTARTS   AGE
httpd-77896d99b5-pk52m   1/1     Running   0          24s
httpd-77896d99b5-pmlr9   1/1     Running   0          40s
httpd-77896d99b5-spn96   1/1     Running   0          9s

我们发现了如下变化：

Deployment httpd 的镜像更新为 httpd:2.2.32
新创建了 ReplicaSet httpd-1276601241，镜像为 httpd:2.2.32，并且管理了三个新的 Pod。
之前的 ReplicaSet httpd-551879778 里面已经没有任何 Pod。

结论是：ReplicaSet httpd-551879778 的三个 httpd:2.2.31 Pod 已经被 ReplicaSet httpd-1276601241 的三个 httpd:2.2.32 Pod 替换了。

具体过程可以通过 kubectl describe deployment httpd 查看。

Events:
  Type    Reason             Age    From                   Message
  ----    ------             ----   ----                   -------
  Normal  ScalingReplicaSet  6m4s   deployment-controller  Scaled up replica set httpd-56df754d56 to 3
  Normal  ScalingReplicaSet  2m23s  deployment-controller  Scaled up replica set httpd-77896d99b5 to 1
  Normal  ScalingReplicaSet  2m7s   deployment-controller  Scaled down replica set httpd-56df754d56 to 2
  Normal  ScalingReplicaSet  2m7s   deployment-controller  Scaled up replica set httpd-77896d99b5 to 2
  Normal  ScalingReplicaSet  112s   deployment-controller  Scaled down replica set httpd-56df754d56 to 1
  Normal  ScalingReplicaSet  112s   deployment-controller  Scaled up replica set httpd-77896d99b5 to 3
  Normal  ScalingReplicaSet  110s   deployment-controller  Scaled down replica set httpd-56df754d56 to 0

每次只更新替换一个 Pod：

ReplicaSet httpd-1276601241 增加一个 Pod，总数为 1。
ReplicaSet httpd-551879778 减少一个 Pod，总数为 2。
ReplicaSet httpd-1276601241 增加一个 Pod，总数为 2。
ReplicaSet httpd-551879778 减少一个 Pod，总数为 1。
ReplicaSet httpd-1276601241 增加一个 Pod，总数为 3。
ReplicaSet httpd-551879778 减少一个 Pod，总数为 0。

每次替换的 Pod 数量是可以定制的。Kubernetes 提供了两个参数 maxSurge 和 maxUnavailable 来精细控制 Pod 的替换数量，我们将在后面结合 Health Check 特性一起讨论。

回滚

kubectl apply 每次更新应用时 Kubernetes 都会记录下当前的配置，保存为一个 revision（版次），这样就可以回滚到某个特定 revision。

默认配置下，Kubernetes 只会保留最近的几个 revision，可以在 Deployment 配置文件中通过 revisionHistoryLimit 属性增加 revision 数量。

下面实践回滚功能。应用有如下三个配置文件 httpd.v1.yml，httpd.v2.yml 和 httpd.v3.yml，分别对应不同的 httpd 镜像 2.4.16，2.4.17 和 2.4.18：

apiVersion: apps/v1beta1
kind: Deployment
metadata:
  name: httpd
spec:
  revisionHistoryLimit: 10
  replicas: 3
  template:
    metadata:
      labels:
        run: httpd
    spec:
      containers:
      - name: httpd
        image: httpd:2.4.16
        ports:
        - containerPort: 80

apiVersion: apps/v1beta1
kind: Deployment
metadata:
  name: httpd
spec:
  revisionHistoryLimit: 10
  replicas: 3
  template:
    metadata:
      labels:
        run: httpd
    spec:
      containers:
      - name: httpd
        image: httpd:2.4.17
        ports:
        - containerPort: 80

apiVersion: apps/v1beta1
kind: Deployment
metadata:
  name: httpd
spec:
  revisionHistoryLimit: 10
  replicas: 3
  template:
    metadata:
      labels:
        run: httpd
    spec:
      containers:
      - name: httpd
        image: httpd:2.4.18
        ports:
        - containerPort: 80

通过 kubectl apply 部署并更新应用：

[root@k8s-master ~]# kubectl apply -f httpd.v1.yml --record 
deployment.apps/httpd created
[root@k8s-master ~]# kubectl get deployments httpd -o wide
NAME    READY   UP-TO-DATE   AVAILABLE   AGE   CONTAINERS   IMAGES         SELECTOR
httpd   3/3     3            3           36s   httpd        httpd:2.4.16   run=httpd
[root@k8s-master ~]# kubectl apply -f httpd.v2.yml --record  
deployment.apps/httpd configured
[root@k8s-master ~]# kubectl get deployments httpd -o wide  
NAME    READY   UP-TO-DATE   AVAILABLE   AGE     CONTAINERS   IMAGES         SELECTOR
httpd   3/3     1            3           2m24s   httpd        httpd:2.4.17   run=httpd
[root@k8s-master ~]# kubectl apply -f httpd.v3.yml --record  
deployment.apps/httpd configured
[root@k8s-master ~]# kubectl get deployments httpd -o wide  
NAME    READY   UP-TO-DATE   AVAILABLE   AGE     CONTAINERS   IMAGES         SELECTOR
httpd   3/3     1            3           2m43s   httpd        httpd:2.4.18   run=httpd

--record 的作用是将当前命令记录到 revision 记录中，这样我们就可以知道每个 revison 对应的是哪个配置文件。通过 kubectl rollout history deployment httpd 查看 revison 历史记录。

[root@k8s-master ~]# kubectl rollout history deployment httpd 
deployment.extensions/httpd 
REVISION  CHANGE-CAUSE
1         kubectl apply --filename=httpd.v1.yml --record=true
2         kubectl apply --filename=httpd.v2.yml --record=true
3         kubectl apply --filename=httpd.v3.yml --record=true

CHANGE-CAUSE 就是 --record 的结果。如果要回滚到某个版本，比如 revision 1，可以执行命令 kubectl rollout undo deployment httpd --to-revision=1：

[root@k8s-master ~]# kubectl rollout undo deployment httpd --to-revision=1
deployment.extensions/httpd rolled back
[root@k8s-master ~]# kubectl get deployments. httpd -o wide
NAME    READY   UP-TO-DATE   AVAILABLE   AGE     CONTAINERS   IMAGES         SELECTOR
httpd   3/3     3            3           6m50s   httpd        httpd:2.4.16   run=httpd

此时，revison 历史记录也会发生相应变化。

[root@k8s-master ~]# kubectl rollout history deployment httpd    deployment.extensions/httpd 
REVISION  CHANGE-CAUSE
2         kubectl apply --filename=httpd.v2.yml --record=true
3         kubectl apply --filename=httpd.v3.yml --record=true
4         kubectl apply --filename=httpd.v1.yml --record=true

revison 1 变成了 revison 4。不过我们可以通过 CHANGE-CAUSE 知道每个 revison 的具体含义。所以一定要在执行 kubectl apply 时加上 --record参数。

网站栏目：k8s之滚动更新(RollingUpdate)与回滚
文章地址：http://bzwzjz.com/article/ggshjh.html

用户体验为先导为品牌带来生命力

k8s之滚动更新(RollingUpdate)与回滚

滚动更新

回滚

其他资讯

用户体验为先导 为品牌带来生命力

k8s之滚动更新(RollingUpdate)与回滚

滚动更新

回滚

其他资讯

用户体验为先导为品牌带来生命力