for i =...
我们提供的服务有：成都网站建设、网站制作、微信公众号开发、网站优化、网站认证、龙马潭ssl等。为上千企事业单位解决了网站和推广的问题。提供周到的售前咨询和贴心的售后服务，是有科学管理、有技术的龙马潭网站制作公司
buf=space(60)'我猜与buf有关，应该在每次读取数据之前用空格腾出空间
l = GetPrivateProfileString("config", i j,vbNullString, buf, 60, Application.StartupPath "\temp\frm3.ini")
datagridview1.Rows(i).Cells(j).Value = buf.Replace(" ", "").replace(chr(9),"")
next
你那个不是空格吧，是不是多余的tab呢，这样试试
Dim b As String = replace(Trim(strItemValue(i+1)),chr(9),"")
表示ASCII码为8的字符
ASCII值为 8、9、10 和 13 分别转换为退格、制表、换行和回车字符。
'只允许输入0至9以及倒退键的示例
If (e.KeyChar = Chr(Asc("0")) And e.KeyChar = Chr(Asc("9"))) Or e.KeyChar = Chr(8) Then Exit Sub
e.KeyChar = Chr(0) ‘拦截其他键值
分好少：
Private Const NCBASTAT As Long = H33
Private Const NCBNAMSZ As Long = 16
Private Const HEAP_ZERO_MEMORY As Long = H8
Private Const HEAP_GENERATE_EXCEPTIONS As Long = H4
Private Const NCBRESET As Long = H32
Private Type NET_CONTROL_BLOCK 'NCB
ncb_command As Byte
ncb_retcode As Byte
ncb_lsn As Byte
ncb_num As Byte
ncb_buffer As Long
ncb_length As Integer
ncb_callname As String * NCBNAMSZ
ncb_name As String * NCBNAMSZ
ncb_rto As Byte
ncb_sto As Byte
ncb_post As Long
ncb_lana_num As Byte
ncb_cmd_cplt As Byte
ncb_reserve(9) As Byte ' Reserved, must be 0
ncb_event As Long
End Type
Private Type ADAPTER_STATUS
adapter_address(5) As Byte
rev_major As Byte
reserved0 As Byte
adapter_type As Byte
rev_minor As Byte
duration As Integer
frmr_recv As Integer
frmr_xmit As Integer
iframe_recv_err As Integer
xmit_aborts As Integer
xmit_success As Long
recv_success As Long
iframe_xmit_err As Integer
recv_buff_unavail As Integer
t1_timeouts As Integer
ti_timeouts As Integer
Reserved1 As Long
free_ncbs As Integer
max_cfg_ncbs As Integer
max_ncbs As Integer
xmit_buf_unavail As Integer
max_dgram_size As Integer
pending_sess As Integer
max_cfg_sess As Integer
max_sess As Integer
max_sess_pkt_size As Integer
name_count As Integer
End Type
Private Type NAME_BUFFER
name As String * NCBNAMSZ
name_num As Integer
name_flags As Integer
End Type
Private Type ASTAT
adapt As ADAPTER_STATUS
NameBuff(30) As NAME_BUFFER
End Type
Private Declare Function Netbios Lib "netapi32.dll" (pncb As NET_CONTROL_BLOCK) As Byte
Private Declare Sub CopyMemory Lib "kernel32" Alias "RtlMoveMemory" (hpvDest As Any, ByVal hpvSource As Long, ByVal cbCopy As Long)
Private Declare Function GetProcessHeap Lib "kernel32" () As Long
Private Declare Function HeapAlloc Lib "kernel32" (ByVal hHeap As Long, ByVal dwFlags As Long, ByVal dwBytes As Long) As Long
Private Declare Function HeapFree Lib "kernel32" (ByVal hHeap As Long, ByVal dwFlags As Long, lpMem As Any) As Long
Function GetMACAddress() As String
'retrieve the MAC Address for the network controller
'installed, returning a formatted string
Dim tmp As String
Dim pASTAT As Long
Dim NCB As NET_CONTROL_BLOCK
Dim AST As ASTAT
'The IBM NetBIOS 3.0 specifications defines four basic
'NetBIOS environments under the NCBRESET command. Win32
'follows the OS/2 Dynamic Link Routine (DLR) environment.
'This means that the first NCB issued by an application
'must be a NCBRESET, with the exception of NCBENUM.
'The Windows NT implementation differs from the IBM
'NetBIOS 3.0 specifications in the NCB_CALLNAME field.
NCB.ncb_command = NCBRESET
Call Netbios(NCB)
'To get the Media Access Control (MAC) address for an
'ethernet adapter programmatically, use the Netbios()
'NCBASTAT command and provide a "*" as the name in the
'NCB.ncb_CallName field (in a 16-chr string).
NCB.ncb_callname = "* "
NCB.ncb_command = NCBASTAT
'For machines with multiple network adapters you need to
'enumerate the LANA numbers and perform the NCBASTAT
'command on each. Even when you have a single network
'adapter, it is a good idea to enumerate valid LANA numbers
'first and perform the NCBASTAT on one of the valid LANA
'numbers. It is considered bad programming to hardcode the
'LANA number to 0 (see the comments section below).
NCB.ncb_lana_num = 0
NCB.ncb_length = Len(AST)
pASTAT = HeapAlloc(GetProcessHeap(), HEAP_GENERATE_EXCEPTIONS Or HEAP_ZERO_MEMORY, NCB.ncb_length)
If pASTAT = 0 Then
Debug.Print "memory allocation failed!"
Exit Function
End If
NCB.ncb_buffer = pASTAT
Call Netbios(NCB)
CopyMemory AST, NCB.ncb_buffer, Len(AST)
tmp = Format$(Hex(AST.adapt.adapter_address(0)), "00") " " Format$(Hex(AST.adapt.adapter_address(1)), "00") " " Format$(Hex(AST.adapt.adapter_address(2)), "00") " " Format$(Hex(AST.adapt.adapter_address(3)), "00") " " Format$(Hex(AST.adapt.adapter_address(4)), "00") " " Format$(Hex(AST.adapt.adapter_address(5)), "00")
HeapFree GetProcessHeap(), 0, pASTAT
GetMACAddress = tmp
End Function
Private Sub Command1_Click()
MsgBox "Network adapter address: " + GetMACAddress()
End Sub