rac如何修改ip地址-创新互联

小编给大家分享一下rac如何修改ip地址，相信大部分人都还不怎么了解，因此分享这篇文章给大家参考一下，希望大家阅读完这篇文章后大有收获，下面让我们一起去了解一下吧！

创新互联建站自2013年起，先为阜新等服务建站，阜新等地企业，进行企业商务咨询服务。为阜新企业网站制作PC+手机+微官网三网同步一站式服务解决您的所有建站问题。

oracle release 11.2.0.4.0
本次实验模式netmask:255.255.255.0


一：修改主机ip,vip,scan（网卡名称不变）
二：修改Private IP
三：修改公网网卡名称，ip地址不变
四：修改Private网卡名称，ip地址不变
五：修改公网网卡名称，ip 
六：修改Private网卡名称，ip
附录：子网掩码地址计算




*****************************
*****************************
备份：2台主机：


私有网络配置不仅仅存在ocr中，还存在gpnp profile中，所以首先需要备份profile.xml：
[grid@host01 peer]$ pwd
/u01/11.2.0/grid/gpnp/host01/profiles/peer
[grid@host01 peer]$ ls
pending.xml  profile.old  profile_orig.xml  profile.xml
[grid@host01 peer]$ cp profile.xml profile.xml.bak


[root@host02 ~]# 
[root@host02 ~]# cd /u01/11.2.0/grid/gpnp/host02/profiles/peer/
[root@host02 peer]# ls
profile_orig.xml  profile.xml
[root@host02 peer]# cp profile.xml profile.xml.bak


Ocr备份：
[root@host01 ~]# /u01/11.2.0/grid/bin/ocrconfig -manualbackup


host02     2018/03/29 08:48:19     /u01/11.2.0/grid/cdata/host-cluster/backup_20180329_084819.ocr
[root@host01 ~]# /u01/11.2.0/grid/bin/ocrconfig -showbackup


host02     2018/03/29 06:08:55     /u01/11.2.0/grid/cdata/host-cluster/backup00.ocr


host02     2018/03/29 02:08:55     /u01/11.2.0/grid/cdata/host-cluster/backup01.ocr


host02     2018/03/28 22:08:54     /u01/11.2.0/grid/cdata/host-cluster/backup02.ocr


host02     2018/03/28 22:08:54     /u01/11.2.0/grid/cdata/host-cluster/day.ocr


host02     2018/03/28 22:08:54     /u01/11.2.0/grid/cdata/host-cluster/week.ocr


host02     2018/03/29 08:48:19     /u01/11.2.0/grid/cdata/host-cluster/backup_20180329_084819.ocr


hosts配置文件备份：


cp /etc/hosts /tmp/hosts.bak0329


*****************************
情景一
*****************************
修改主机ip,vip,scan（网卡名称不变）
修改之前：
#192.168.0.35 host01
#192.168.0.36 host01-vip
#192.168.0.38 host02
#192.168.0.39 host02-vip
#192.168.0.40 scan
修改之后：
172.16.0.135 host01
172.16.0.136 host01-vip
172.16.0.138 host02
172.16.0.139 host02-vip
172.16.0.140 scan




1.正常关库、监听和CRS
######/u01/11.2.0/grid/bin/crsctl stop crs
2.修改/etc/hosts配置文件
172.16.0.135 host01
172.16.0.136 host01-vip
172.16.0.138 host02
172.16.0.139 host02-vip
172.16.0.140 scan
3.OS层修改公有网卡地址


4.启动crs
######/u01/11.2.0/grid/bin/crsctl start crs
5.修改Public IP


[grid@host01 ~]$ oifcfg iflist
eth4  172.16.0.0
eth5  10.168.0.0
eth5  169.254.0.0


[grid@host01 ~]$ oifcfg getif
eth4  192.168.0.0  global  public
eth5  10.168.0.0  global  cluster_interconnect
[grid@host01 ~]$ oifcfg delif -global eth4
[grid@host01 ~]$ oifcfg setif -global eth4/172.16.0.0:public
[grid@host01 ~]$ oifcfg getif
eth5  10.168.0.0  global  cluster_interconnect
eth4  172.16.0.0  global  public




6.修改VIP--停止数据库和监听
srvctl stop vip -n host01
srvctl stop vip -n host02


#root用户修改：
srvctl modify nodeapps -n host01 -A 172.16.0.136/255.255.255.0/eth4
srvctl modify nodeapps -n host02 -A 172.16.0.139/255.255.255.0/eth4


[root@host01 ~]# /u01/11.2.0/grid/bin/srvctl config vip -n host01
VIP exists: /172.16.0.136/172.16.0.136/172.16.0.0/255.255.255.0/eth4, hosting node host01
[root@host01 ~]# /u01/11.2.0/grid/bin/srvctl config vip -n host02
VIP exists: /host02-vip/172.16.0.139/172.16.0.0/255.255.255.0/eth4, hosting node host02




/u01/11.2.0/grid/bin/srvctl start vip -n host01
/u01/11.2.0/grid/bin/srvctl start vip -n host02




确认local_listener信息:
检查local_listener信息，如果不正确需要修改，我这里查询是正确的。


--两个节点分别确认：
show parameter local_listener
--修改：
alter system set local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.136)(PORT=1521))' sid='orcl1';
alter system set local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.139)(PORT=1521))' sid='orcl2';


7.修改SCAN VIP


 srvctl stop scan_listener
 srvctl stop scan
 srvctl status scan_listener
 srvctl status scan
#root
/u01/11.2.0/grid/bin/srvctl modify scan -n scan
/u01/11.2.0/grid/bin/srvctl  config scan
SCAN name: scan, Network: 1/172.16.0.0/255.255.255.0/eth4
SCAN VIP name: scan1, IP: /scan/172.16.0.140


/u01/11.2.0/grid/bin/srvctl  start scan
/u01/11.2.0/grid/bin/srvctl  start scan_listener




*****************************
情景二
*****************************
修改Private IP


修改前：
10.168.0.123/24--eth5
10.168.0.124/24--eth5
修改后地址
100.16.0.23/24--eth5
100.16.0.24/24--eth5




1,添加新的网络信息
[grid@host01 ~]$ oifcfg getif
eth5  10.168.0.0  global  cluster_interconnect
eth4  192.168.0.0  global  public
[grid@host01 ~]$ 
##新的子网具有相同网卡的名称但不同的子网：
[grid@host01 ~]$ oifcfg setif -global eth5/100.16.0.0:cluster_interconnect
[grid@host01 ~]$ oifcfg getif
eth5  10.168.0.0  global  cluster_interconnect
eth5  100.16.0.0  global  cluster_interconnect
eth4  172.16.0.0  global  public


2，关闭crs
#root执行
/u01/11.2.0/grid/bin/crsctl stop crs


3，修改主机ip地址


4，启动crs
/u01/11.2.0/grid/bin/crsctl start crs


5，删除旧的网络信息
[grid@host01 ~]$ oifcfg delif -global eth5/10.168.0.0
[grid@host01 ~]$ oifcfg getif
eth5  100.16.0.0  global  cluster_interconnect
eth6  172.16.0.0  global  public






*****************************
情景三
*****************************
公网网卡名称 eth4===>eth6


1，修改网卡信息
[grid@host01 ~]$ oifcfg getif
eth5  10.168.0.0  global  cluster_interconnect
eth5  100.16.0.0  global  cluster_interconnect
eth4  172.16.0.0  global  public
[grid@host01 ~]$ oifcfg iflist
eth6  172.16.0.0
eth5  100.16.0.0
eth5  169.254.0.0
[grid@host01 ~]$ oifcfg setif -global eth6/172.16.0.0:public
[grid@host01 ~]$ oifcfg getif
eth5  10.168.0.0  global  cluster_interconnect
eth5  100.16.0.0  global  cluster_interconnect
eth4  172.16.0.0  global  public
eth6  172.16.0.0  global  public
[grid@host01 ~]$ oifcfg delif -global eth4/172.16.0.0:public
[grid@host01 ~]$ oifcfg getif
eth5  10.168.0.0  global  cluster_interconnect
eth5  100.16.0.0  global  cluster_interconnect
eth6  172.16.0.0  global  public


2,停止crs
3,修改操作系统网卡名称
4，启动crs
5，修改vip,scan
#root执行
srvctl stop vip -n host01
srvctl stop vip -n host02
srvctl modify nodeapps -n host01 -A 172.16.0.136/255.255.255.0/eth6
srvctl modify nodeapps -n host02 -A 172.16.0.139/255.255.255.0/eth6


[root@host01 host01]# /u01/11.2.0/grid/bin/srvctl config vip -n host01
VIP exists: /172.16.0.136/172.16.0.136/172.16.0.0/255.255.255.0/eth6, hosting node host01
[root@host01 host01]# /u01/11.2.0/grid/bin/srvctl config vip -n host02
VIP exists: /host02-vip/172.16.0.139/172.16.0.0/255.255.255.0/eth6, hosting node host02


/u01/11.2.0/grid/bin/srvctl start vip -n host01
/u01/11.2.0/grid/bin/srvctl start vip -n host02


*****************************
情景四
*****************************


修改Private网卡名称 eth5===>eth4


1，添加新的网络信息
[grid@host01 ~]$ 
[grid@host01 ~]$ oifcfg setif -global eth4/100.16.0.0:cluster_interconnect
[grid@host01 ~]$ oifcfg getif
eth5  100.16.0.0  global  cluster_interconnect
eth6  172.16.0.0  global  public
eth4  100.16.0.0  global  cluster_interconnect


2，停止crs
3，修改主机网卡信息
4，启动crs
5，删除多余网络信息
[grid@host01 ~]$ oifcfg getif
eth5  100.16.0.0  global  cluster_interconnect
eth6  172.16.0.0  global  public
eth4  100.16.0.0  global  cluster_interconnect
[grid@host01 ~]$ oifcfg delif -global eth5/100.16.0.0
[grid@host01 ~]$ oifcfg getif
eth6  172.16.0.0  global  public
eth4  100.16.0.0  global  cluster_interconnect






===========
修改之前：
[root@host02 network-scripts]# ip a s
1: lo: mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth6: mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:8e:06:87 brd ff:ff:ff:ff:ff:ff
    inet 172.16.0.138/24 brd 172.16.0.255 scope global eth6
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe8e:687/64 scope link 
       valid_lft forever preferred_lft forever
3: eth4: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:50:56:8e:8c:39 brd ff:ff:ff:ff:ff:ff
4: eth5: mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:8e:2d:83 brd ff:ff:ff:ff:ff:ff
    inet 100.16.0.24/24 brd 100.16.0.255 scope global eth5
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe8e:2d83/64 scope link 
       valid_lft forever preferred_lft forever


=============
修改之后
[root@host02 network-scripts]# ip a s
1: lo: mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth6: mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:8e:06:87 brd ff:ff:ff:ff:ff:ff
    inet 172.16.0.138/24 brd 172.16.0.255 scope global eth6
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe8e:687/64 scope link 
       valid_lft forever preferred_lft forever
3: eth4: mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:8e:8c:39 brd ff:ff:ff:ff:ff:ff
    inet 100.16.0.24/24 brd 100.16.0.255 scope global eth4
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe8e:8c39/64 scope link 
       valid_lft forever preferred_lft forever
4: eth5: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:50:56:8e:2d:83 brd ff:ff:ff:ff:ff:ff
=========




***************************
五：修改公网网卡名称，ip 
***************************
修改之前：<<<==========eth6


172.16.0.135 host01
172.16.0.136 host01-vip
172.16.0.138 host02
172.16.0.139 host02-vip
172.16.0.140 scan


[root@host01 network-scripts]# ip a s
1: lo: mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth6: mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:8e:71:9f brd ff:ff:ff:ff:ff:ff
    inet 172.16.0.135/24 brd 172.16.0.255 scope global eth6
       valid_lft forever preferred_lft forever
    inet 172.16.0.136/24 brd 172.16.0.255 scope global secondary eth6:3
       valid_lft forever preferred_lft forever
    inet 172.16.0.140/24 brd 172.16.0.255 scope global secondary eth6:2
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe8e:719f/64 scope link 
       valid_lft forever preferred_lft forever
3: eth4: mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:8e:48:2b brd ff:ff:ff:ff:ff:ff
    inet 100.16.0.23/24 brd 100.16.0.255 scope global eth4
       valid_lft forever preferred_lft forever
    inet 169.254.199.73/16 brd 169.254.255.255 scope global eth4:1
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe8e:482b/64 scope link 
       valid_lft forever preferred_lft forever
4: eth5: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:50:56:8e:a3:f9 brd ff:ff:ff:ff:ff:ff


修改之后：<<<==========eth5
192.168.0.35 host01
192.168.0.36 host01-vip
192.168.0.38 host02
192.168.0.39 host02-vip
192.168.0.40 scan


1,停止crs
2,修改hosts
3,修改主机ip地址到新网卡
4,启动crs
5,修改网卡信息
[grid@host01 ~]$ oifcfg iflist
eth4  100.16.0.0
eth4  169.254.0.0
eth5  192.168.0.0


[grid@host01 ~]$ oifcfg getif
eth6  172.16.0.0  global  public
eth4  100.16.0.0  global  cluster_interconnec
[grid@host01 ~]$ oifcfg delif -global eth6
[grid@host01 ~]$ oifcfg setif -global eth5/192.168.0.0:public
[grid@host01 ~]$ oifcfg setif -global eth5/192.168.0.0:public
[grid@host01 ~]$ oifcfg getif
eth4  100.16.0.0  global  cluster_interconnect
eth5  192.168.0.0  global  public




6,修改vip,scan地址
#root用户修改：
srvctl stop vip -n host01
srvctl stop vip -n host02


#root用户修改：
srvctl modify nodeapps -n host01 -A 192.168.0.36/255.255.255.0/eth5
srvctl modify nodeapps -n host02 -A 192.168.0.39/255.255.255.0/eth5


/u01/11.2.0/grid/bin/srvctl start vip -n host01
/u01/11.2.0/grid/bin/srvctl start vip -n host02




确认local_listener信息:
检查local_listener信息，如果不正确需要修改，我这里查询是正确的。


--两个节点分别确认：
show parameter local_listener
--修改：
alter system set local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST= host01-vip)(PORT=1521))' sid='orcl1';
alter system set local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST= host02-vip)(PORT=1521))' sid='orcl2';




#修改scan
 srvctl stop scan_listener
 srvctl stop scan
 srvctl status scan_listener
 srvctl status scan
#root
/u01/11.2.0/grid/bin/srvctl modify scan -n scan
/u01/11.2.0/grid/bin/srvctl  config scan
SCAN name: scan, Network: 1/192.168.0.0/255.255.255.0/eth5
SCAN VIP name: scan1, IP: /scan/192.168.0.40


/u01/11.2.0/grid/bin/srvctl  start scan
/u01/11.2.0/grid/bin/srvctl  start scan_listener


修改之后ip地址信息：
[root@host01 network-scripts]# ip a s
1: lo: mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth6: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:50:56:8e:71:9f brd ff:ff:ff:ff:ff:ff
3: eth4: mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:8e:48:2b brd ff:ff:ff:ff:ff:ff
    inet 100.16.0.23/24 brd 100.16.0.255 scope global eth4
       valid_lft forever preferred_lft forever
    inet 169.254.199.73/16 brd 169.254.255.255 scope global eth4:1
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe8e:482b/64 scope link 
       valid_lft forever preferred_lft forever
4: eth5: mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:8e:a3:f9 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.35/24 brd 192.168.0.255 scope global eth5
       valid_lft forever preferred_lft forever
    inet 192.168.0.40/24 brd 192.168.0.255 scope global secondary eth5:1
       valid_lft forever preferred_lft forever
    inet 192.168.0.36/24 brd 192.168.0.255 scope global secondary eth5:3
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe8e:a3f9/64 scope link 
       valid_lft forever preferred_lft forever


***************************
六：修改Private网卡名称，ip
***************************
修改之前网络信息：《============eth4
100.16.0.23 
100.16.0.24


2: eth6: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:50:56:8e:71:9f brd ff:ff:ff:ff:ff:ff
3: eth4: mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:56:8e:48:2b brd ff:ff:ff:ff:ff:ff
    inet 100.16.0.23/24 brd 100.16.0.255 scope global eth4
       valid_lft forever preferred_lft forever
    inet 169.254.199.73/16 brd 169.254.255.255 scope global eth4:1
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe8e:482b/64 scope link 
       valid_lft forever preferred_lft forever


修改之后网络信息：《============eth6
10.10.10.123 
10.10.10.124


1，修改网络接口信息
[grid@host01 ~]$ oifcfg setif -global eth6/10.10.10.0:cluster_interconnect
[grid@host01 ~]$ oifcfg getif
eth4  100.16.0.0  global  cluster_interconnect
eth5  192.168.0.0  global  public
eth6  10.10.10.0  global  cluster_interconnect


2，关闭crs
3，修改主机网卡IP信息
4，启动crs
5，删除多余网络接口信息
[grid@host01 ~]$ oifcfg getif
eth4  100.16.0.0  global  cluster_interconnect
eth5  192.168.0.0  global  public
eth6  10.10.10.0  global  cluster_interconnect
[grid@host01 ~]$ oifcfg delif -global eth4
[grid@host01 ~]$ oifcfg getif
eth5  192.168.0.0  global  public
eth6  10.10.10.0  global  cluster_interconnect






附录：


子网掩码地址，在使用oifcfg 需要计算subnet。
Name:
oifcfg - Oracle Interface Configuration Tool.


Usage:  oifcfg iflist [-p [-n]]
oifcfg setif {-node | -global} {/:}...


IP地址　192.168.0.1
子网掩码　255.255.255.0
AND运算(AND运算法则：1 与1 = 1 ,1 与0 = 0 ,0 与1 = 0 ,0 与0 = 0 ,即当对应位均为1时结果为1，其余为0。)
转化为二进制进行运算：
I P 地址　11000000.10101000.00000000.00000001
子网掩码　11111111.11111111.11111111.00000000
AND运算
11000000.10101000.00000000.00000000
转化为十进制后为：
192.168.0.0  <==========该地址为oifcfg需要的地址。

以上是“rac如何修改ip地址”这篇文章的所有内容，感谢各位的阅读！相信大家都有了一定的了解，希望分享的内容对大家有所帮助，如果还想学习更多知识，欢迎关注创新互联-成都网站建设公司行业资讯频道！

新闻标题：rac如何修改ip地址-创新互联
网页链接：http://bzwzjz.com/article/cdjocs.html